Click to open expanded view
1) Chipet: CH340
2) Plastic case material
3) Cable length: 125cm
4) Usable for ISO9141 and KWP2000 transmission protocol like used for example by: For Volkswagen, Audi, Skoda, Seat
5) This cable cannot work if your car uses a protocol/bus system like VPW, PWM or CAN-bus
6) Terminal K = Bus of communication
7) Terminal L = Ignition for waking up car computing system (ECU: Engine Control Unit)
8) Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW
9) This K/L Diagnostic interface & cables work on ISO/KWP (Key Word Protocol) launched after 1996 only
10) Supported also ISO9141 protocol
11) The Cables may work with some versions of the Car soft, but car soft used a lot of different interfaces during the different versions
12) Comes with software CD
Note: Only applicable to XP system
2) Plastic case material
3) Cable length: 125cm
4) Usable for ISO9141 and KWP2000 transmission protocol like used for example by: For Volkswagen, Audi, Skoda, Seat
5) This cable cannot work if your car uses a protocol/bus system like VPW, PWM or CAN-bus
6) Terminal K = Bus of communication
7) Terminal L = Ignition for waking up car computing system (ECU: Engine Control Unit)
8) Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW
9) This K/L Diagnostic interface & cables work on ISO/KWP (Key Word Protocol) launched after 1996 only
10) Supported also ISO9141 protocol
11) The Cables may work with some versions of the Car soft, but car soft used a lot of different interfaces during the different versions
12) Comes with software CD
Note: Only applicable to XP system
what it means to be
A GarSupply Customer
- Choosing a selection results in a full page refresh.
!