VLOGLITE AC-04 1 To 1 Photography Universal Flash Guide Wireless Flash Trigger

1. Material: plastic moulding, metal hot shoe holder, metal umbrella holder
2. Transmitter battery: 23A 12V battery included, the number of times of use up to 10000 times
3. Receiver battery: 2 x 1.5V AAA batteries (not included)
4. Outdoor remote control distance: about 30m
5. Indoor remote control distance: about 25m
6. Channel: 4 channels
7. Frequency: 433Mhz
8. Synchronisation speed: up to 1/250S
9. Antenna: built-in PCB antenna

Features:
1. Wireless remote control off-camera flash on-board flash, as long as the digital camera has a hot shoe seat, you can off-camera flash on-board flash
2. 30 metres long-distance triggering, strong anti-interference ability
3. Low voltage (5V-12V) triggering, responsive, no strobe, leakage and other bad phenomena
4. The overall height of the design is moderate, the photographer in the use of the trigger will not be large / high and affect the shooting results
5. Connect the tripod for 1/4 inch nut fixed, the flash will not fall down due to loose
6. FM switch on the outside, adjustable at any time, convenient for photographers to quickly adjust the frequency
7. Receiver power supply for 2 AAA batteries (not included), you can replace the batteries anytime, anywhere
8. The hot shoe holder is tapped structure, will not come loose
9. Working efficiency of 433MHZ, the main role in the remote control flash film and television flash, start the group can be led at the same time flash flash function
10. Synchronisation speed is generally about 1/200s, the highest can be synchronised 1/250s, depending on the camera or video light varies
11. Standard universal 3.5 plug can be converted to 6.5 plug, can trigger all 3.5/6.5 film and television flash

Installation:
1. Connect the power plug to the receiver power input port, the receiver signal indicator lights up
2. Insert the receiver power output into the flash socket, and insert the receiver's signal cable into the flash
3. Select multiple channels and set them to the same channel, and set the receiver and transmitter channels to the same position
4. Mount the transmitter on the camera hot shoe, press the shutter flash to synchronise the flash with the shutter