Click to open expanded view
1. The 3D Touch automatic leveling sensor is a device that uses the Hall effect to achieve leveling
2. The position of the point can be obtained by touching the point on the heating bed, and then compensated by adjusting the Z-axis height during printing, so that printing can be realized even when the platform is uneven
3. Rated current: 300mA
4. Shell material: PC
5. Voltage: 5V
6. Current: 15mA
Shipping list:
-1 x 20cm wire
-1 x 1/1.5m wire
-1 x Sensor
-1 x Wound terminal
-1 x XH2.542pin terminal
-1 x XH2.543pin terminal
-2 x M3 nuts/nails
what it means to be
A GarSupply Customer
- Choosing a selection results in a full page refresh.
!