Click to open expanded view
1. The casing of the pump is made of durable and waterproof ABS. And all the ends and terminals of the wires are equipped with heavy-duty marine sealant, which is very safe to use.
2. Fully capable of diving and burning protection.
3. The easy to install and remove filter device ensures that the pump runs freely without vibration.
4. The suction lift does not need to be completely submerged.
5. Function: pump out the accumulated water at the bottom of the cabin
6. Scope of application: main purpose:
It can be widely used in sewage sampling, large-flow liquid transfer, low-noise continuous working occasions; large and super large aquariums, small swimming pools, reservoirs, fountains and other purposes. Fresh water and sea water quality analysis, sewage treatment, sewage sampling, water purification, ship bilge sewage discharge, breeding and viewing, water circulation transfer, agricultural spraying, irrigation, ground, carpet cleaning, etc.; applicable industries: environmental protection, medicine, ships, fisheries and breeding, Industry, agriculture, housekeeping and other industries
7. Installation position: bottom of the cabin
8. Parameters:
Material: ABS+Stainless steel
Flow rate: 1100GPH
Cable length: 1m
Inlet diameter: 25mm
Entrance outer diameter: 29mm
Applicable voltage: 12V
Maximum working temperature: 43 degrees Celsius
Connection method: red positive pole, blue negative pole
2. Fully capable of diving and burning protection.
3. The easy to install and remove filter device ensures that the pump runs freely without vibration.
4. The suction lift does not need to be completely submerged.
5. Function: pump out the accumulated water at the bottom of the cabin
6. Scope of application: main purpose:
It can be widely used in sewage sampling, large-flow liquid transfer, low-noise continuous working occasions; large and super large aquariums, small swimming pools, reservoirs, fountains and other purposes. Fresh water and sea water quality analysis, sewage treatment, sewage sampling, water purification, ship bilge sewage discharge, breeding and viewing, water circulation transfer, agricultural spraying, irrigation, ground, carpet cleaning, etc.; applicable industries: environmental protection, medicine, ships, fisheries and breeding, Industry, agriculture, housekeeping and other industries
7. Installation position: bottom of the cabin
8. Parameters:
Material: ABS+Stainless steel
Flow rate: 1100GPH
Cable length: 1m
Inlet diameter: 25mm
Entrance outer diameter: 29mm
Applicable voltage: 12V
Maximum working temperature: 43 degrees Celsius
Connection method: red positive pole, blue negative pole
Specification:
| General |
|
| Package Weight |
|
what it means to be
A GarSupply Customer
- Choosing a selection results in a full page refresh.
!