Click to open expanded view
Feature:
1. Easy to Operate: dent puller kit provides a suitable platform for anyone to use as the accessories are not complicated at all. It is easy to pops a dent with the detailed repair steps described in the manual.
2. Widely Used: Paintless car dent remover can be applied to remove the dent from the car, as well as auto body creases and hail damage, effective for dents in the vehicle, refrigerators, washing machines, and other metal appliance. Saving time and money.
3. Working voltage: 100V-240V / 12V
4. Power: 20W
How to use the PDR tools:
1. Clean damage surface with a clean wet cloth
2. Put the glue stick to gun and connect the power source and preheat for 5-10 minutes
3. Pull the trigger and apply the suitable drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue)(Note: The larger the drawing gasket is, the larger the drawing force is)
4. Immediately place the drawing gasket with hot melt glue in the center of the dent and hold until sticks (Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter)
5. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent
6. When dent was removal, clear the glue by alcohol with plastic shovel
7. If dent still exists, knock it slightly with a flattening hammer with Tapdown head 8 Repeat the operation steps above until the dents are repaired
Package list:
2 in1 puller x 1
checking board x 1
gold puller x 1
bridge puller with 6 tabs x 1
rubber hammer x 1
knock down pen with 9 pen heads x 1
red tabs x 10
blue tabs x 18
purple tabs x 24
yellow glue sticks(7mmx270mm) x 10
black glue sticks(7mmx270mm) x 10
glue gun(US/EU/UK/Car Charger Plug) x 1, cable length: 1.4m, note: car cigarette lighter plug is 5m
shovel x 1
towel x 1
alcohol bottle(alcohol not included) x 1
English manual x 1
tools bag x 1
1. Easy to Operate: dent puller kit provides a suitable platform for anyone to use as the accessories are not complicated at all. It is easy to pops a dent with the detailed repair steps described in the manual.
2. Widely Used: Paintless car dent remover can be applied to remove the dent from the car, as well as auto body creases and hail damage, effective for dents in the vehicle, refrigerators, washing machines, and other metal appliance. Saving time and money.
3. Working voltage: 100V-240V / 12V
4. Power: 20W
How to use the PDR tools:
1. Clean damage surface with a clean wet cloth
2. Put the glue stick to gun and connect the power source and preheat for 5-10 minutes
3. Pull the trigger and apply the suitable drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue)(Note: The larger the drawing gasket is, the larger the drawing force is)
4. Immediately place the drawing gasket with hot melt glue in the center of the dent and hold until sticks (Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter)
5. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent
6. When dent was removal, clear the glue by alcohol with plastic shovel
7. If dent still exists, knock it slightly with a flattening hammer with Tapdown head 8 Repeat the operation steps above until the dents are repaired
Package list:
2 in1 puller x 1
checking board x 1
gold puller x 1
bridge puller with 6 tabs x 1
rubber hammer x 1
knock down pen with 9 pen heads x 1
red tabs x 10
blue tabs x 18
purple tabs x 24
yellow glue sticks(7mmx270mm) x 10
black glue sticks(7mmx270mm) x 10
glue gun(US/EU/UK/Car Charger Plug) x 1, cable length: 1.4m, note: car cigarette lighter plug is 5m
shovel x 1
towel x 1
alcohol bottle(alcohol not included) x 1
English manual x 1
tools bag x 1
what it means to be
A GarSupply Customer
- Choosing a selection results in a full page refresh.
!